Set up your 5G Home Broadband

Your modem will take care of the hard stuff like internet settings, but we’ll need your help to plug it in. The main cables you need will come in the box, and you can grab extra Ethernet cables from the shops if you need them. 

Note: Your TPG 5G SIM is already inside your 5G Modem. Please don't remove it because the SIM won't work in other devices.

Please note that 5G Home Broadband is only suitable for casual online gaming. Learn more.

 

Choose your modem to get started:

Picture Modem
Wi-Fi Max 5G Modem
Wi-Fi Max 5G Modem
Nokia Fastmile 3.2 Modem
Nokia FastMile 3.2 5G Modem
Sagemcom 5866 5G Modem
Sagemcom 5866 5G Modem

 

How to plug in your Wi-Fi Max 5G Modem for 5G Home Broadband

 

  1. Find a good spot for your modem
    • It's best to choose a clear, open location on a shelf or table - ideally near a window.
    • Don't put your modem on the floor or inside a cupboard because this will cause a weak signal.
    • You can try different spots if your first spot isn’t giving you a strong signal.
      Diagram showing comparison of a modem placed low on a crowded shelf with a poor signal, compared to a modem placed on a clear spot on a higher shelf with a strong signal.
  2. Power on your modem
    • Use the power cable to plug your modem's Power port into a power outlet.
    • Press the ON/OFF button.
      Diagram showing Wi-Fi Max 5G Modem's power cable connected to a power outlet. From base to top, ports are power port, on/off button, LAN 2, LAN 1, 2.5G WAN, reset button and WPS Pair button.
  3. Check your 5G signal
    • Check the light on the front of your modem. If it's blue, you’re online with the 5G network and you can start connecting your devices.
    • If the light on the front of your modem is solid orange, then you're online with the 4G network. Your modem may connect to 4G if it provides a better signal than 5G. Try moving your modem to a different spot.
    • If the light on the front of your modem is red, then your modem can’t get a signal on either 5G or 4G. Try moving your modem to a different spot.
    • Can’t get a blue light? Give us a call on 13 14 23 and we'll help you out.
      Photo of blue light at the base of the Wi-Fi Max 5G modem.
  4. Connect devices via Ethernet
    • For online gaming and HD/4K streaming, Ethernet is better than Wi-Fi. Use Ethernet for desktop PCs, gaming consoles or TVs if you can.
    • You can use additional Ethernet cables to connect up to 2 devices to the yellow LAN ports.
    • Need more devices connected by Ethernet? You can plug a network switch or hub into one of the LAN ports.
    • You can connect more devices over Wi-Fi.
      Diagram showing a PC connected to a Wi-Fi Max 5G modem with a yellow Ethernet cable.
  5. Connect your Wi-Fi Devices
    • Check the barcode sticker on the base of your modem. The default name of your Wi-Fi network is printed next to Wi-Fi Name. 
    • Select your Wi-Fi Name on your device, then enter the password printed below Wi-Fi Password.
    • If you’re using a smartphone, you can just scan the QR code on your modem’s barcode sticker.
    • Once connected, your devices will automatically use the best Wi-Fi in range, so you don’t need to manually switch between 2.4GHz and 5GHz networks. 
      Example of Wi-Fi Max 5G Modem barcode sticker. The Wi-Fi Name and Wi-Fi Password is printed below the barcode. The “Scan to connect to Wi-Fi” QR code is on the right-hand side.
  6. Download the My Internet Connect app.
    It’s easy to manage your home network with the My Internet Connect app. 
    • Make sure your device is connected to your modem’s Wi-Fi network.
    • Enter the Login Password on your modem’s barcode sticker.
      Example of Wi-Fi Max 5G Modem barcode sticker with "Login Password" highlighted.
  7. Need help? Call our team using these numbers:
    • 13 14 23 in Australia.
    • +61 2 9007 3023 from overseas.
    • National Relay Service for hearing impaired customers. 

 

How to plug in your Nokia FastMile 3.2 5G Modem for 5G Home Broadband

Note: Your TPG 5G SIM is already inside your modem. Please don't remove it because the SIM won't work in other devices.

  1. Find a good spot for your modem
    • It's best to choose a clear, open location on a shelf or table - ideally near a window.
    • Don't put your modem on the floor or inside a cupboard because this will cause a weak signal.
    • You can try different spots if your first spot isn’t giving you a strong signal.
      Diagram showing comparison of a modem placed low on a crowded shelf with a poor signal, compared to a modem placed on a clear spot on a higher shelf with a strong signal.
  2. Power on your modem
    • Use the power cable to plug your modem's Power port into a power outlet.
    • Press the ON/OFF button.
      Nokia FastMile 3.2 5G plugin - from top to bottom, modem ports are: Signal test button, WPS Pair button, USB, LAN, LAN/WAN, On/Off button, Power.
  3. Check your 5G signal
    • Check the lights on the top of your modem. If the 5G light is lit, you’re online with the 5G network and you can start connecting your devices.
      Note: You can press the Test button on the back of your modem at any time to test your signal. The 3 signal bars above the 5G light will light up: 3 bars is a strong signal, 2 bars is a good signal and 1 bar is a weak signal. If you only get 1 bar, try moving your modem to a different spot.
    • If the 5G light is off and the centre light is green, then you're online with the 4G network. Your modem may connect to 4G if it provides a better signal than 5G. Try moving your modem to a different spot.
    • If the centre light is red, then your modem can’t get a signal on either 5G or 4G. Try moving your modem to a different spot.
    • No 5G light or can’t get a good signal? Give us a call on 13 14 23 and we'll help you out.
       
      Photo of the circular top face of the Nokia FastMile modem. From centre outwards, the lights are Centre, 5G, then a row of 3 signal lights.
  4. Connect devices via Ethernet
    • For online gaming and HD/4K streaming, Ethernet is better than Wi-Fi. Use Ethernet for desktop PCs, gaming consoles or TVs if you can.
    • You can use additional Ethernet cables to connect up to 2 devices to the yellow LAN ports.
    • Need more devices connected by Ethernet? You can plug a network switch or hub into one of the LAN ports.
    • You can connect more devices over Wi-Fi.
       
      Diagram showing a PC connected to a Nokia FastMile modem with a yellow Ethernet cable.
  5. Connect your Wi-Fi devices
    • Check the barcode sticker on the base of your modem. The default name of your Wi-Fi network is printed below Wi-Fi SSID. 
    • Select your Wi-Fi Name on your device, then enter the password printed below Wi-Fi Key.
    • If you’re using a smartphone, you can just scan the QR code on your modem’s barcode sticker.
    • Once connected, your devices will automatically use the best Wi-Fi in range, so you don’t need to manually switch between 2.4GHz and 5GHz networks. 
       
      Diagram of the Nokia FastMile Modem's base. The Wi-Fi Name and Wi-Fi Password is printed below the SIM slot, to the right of the QR code, written as "Wi-Fi SSID" and "Wi-Fi Key".
  6. Need help? Call our team using these numbers:
    • 13 14 23 in Australia.
    • +61 2 9007 3023 from overseas.
    • National Relay Service for hearing impaired customers. 

 

How to plug in your Sagemcomm 5866 5G Modem for 5G Home Broadband

 

  1. Find a good spot for your modem
    • It's best to choose a clear, open location on a shelf or table - ideally near a window.
    • Don't put your modem on the floor or inside a cupboard because this will cause a weak signal.
    • You can try different spots if your first spot isn’t giving you a strong signal.
      Diagram showing comparison of a modem placed low on a crowded shelf with a poor signal, compared to a modem placed on a clear spot on a higher shelf with a strong signal.
  2. Power on your modem
    • Use the power cable to plug your modem's Power port into a power outlet.
    • Press the ON/OFF button.
      Diagram showing the underside of Sagemcomm Modem with a power cable connected to a power outlet. From left to right on the top row, there's a 2.5G LAN port, USB port, LAN/WAN port and LAN port. On the bottom row, there's a Reset button, Power button, Power port and SIM slot.
  3. Check your 5G signal
    • Check the Signal lights on the front of your modem. If you have 3-4 green bars, you’re online with the 5G network and you have a good signal, so you can start connecting your devices.
    • If the Signal lights are yellow, then you're online with the 4G network. Your modem may connect to 4G if it provides a better signal than 5G. Try moving your modem to a different spot.
    • If the Signal lights are off or you only have one bar, then your modem can’t get a good signal on either 5G or 4G. Try moving your modem to a different spot.
    • Can’t get green Signal lights or 3-4 bars? Give us a call on 13 14 23 and we'll help you out.
       
      Diagram of lights on the front of the Sagemcomm modem with Signal bars indicated. 3-4 bars is good signal, 2 bars is average signal and 1 bar is poor signal. From base to top, lights are power, Wi-Fi, and then 4 signal bars.
  4. Connect devices via Ethernet
    • For online gaming and HD/4K streaming, Ethernet is better than Wi-Fi. Use Ethernet for desktop PCs, gaming consoles or TVs if you can.
    • You can use additional Ethernet cables to connect up to 3 devices to the blue 2.5G LAN port, the red LAN/WAN port and the yellow LAN port.
    • Need more devices connected by Ethernet? You can plug a network switch or hub into one of the Ethernet ports—we recommend using the blue 2.5G LAN port.
    • You can connect more devices over Wi-Fi.
       
      Diagram showing the rear of Sagemcomm Modem, where ports on the base are accessible in an alcove. From left to right, ports are LAN, LAN/WAN, USB and 2.5G LAN.
  5. Connect your Wi-Fi devices
    • Check the barcode sticker on the back of your modem. The default name of your Wi-Fi network is printed next to Wi-Fi Network Name (marked A on the diagram).
    • Select your Wi-Fi Name on your device, then enter the password printed beside Wi-Fi Password (marked A on the diagram).
    • If you’re using a smartphone, you can just scan the QR code on your modem’s barcode sticker (marked B on the diagram).
    • Once connected, your devices will automatically use the best Wi-Fi in range, so you don’t need to manually switch between 2.4GHz and 5GHz networks. 
       
      Diagram of the barcode sticker. The Wi-Fi Network Name and Wi-Fi Password are printed below the barcode. The Wi-Fi QR code is beside these details on the right.
  6. Need help? Call our team using these numbers:
    • 13 14 23 in Australia.
    • +61 2 9007 3023 from overseas.
    • National Relay Service for hearing impaired customers. 

 

Was this information helpful?

Why was it not helpful?

Please select an option





Thank you for your feedback.